Lock-n-Load® Inserts make the job of installing inserts quick and easy! Now within seconds, you can install, index and lock your inserts in place without glue.
Precision, self-centering design improves concentricity by aligning to the center of the carbon shaft resulting in better overall flight accuracy and arrow to arrow consistency. Easily index your blades to your vanes before locking the insert into place.
The simple locking mechanism allows you to remove and reuse your Lock-n-Loads on the range or in the field.
Note: Not for use with aluminum shafts.
The Lock-n-Load 165 Hybrid Outsert is designed for micro diameter carbon arrow shafts (.165 ID). It showcases our unique wedge-style self-centering, gripping mechanism. The Lock-n-Load 165 is called a Hybrid Outsert because of its unique design of gripping the inside of the carbon shaft, but the tapered broadhead receiver extends out of the shaft. The insert is sized to accept a standard 8-32 threaded broadhead.
Weight: 50 grains
Material: Aluminum – 7075-T6
Fit: Micro Diameter carbon shafts with a .165 ID (G series)
This list represents carbon arrow shafts with a .165-.166 ID but may not be all inclusive. Consult your specific carbon shaft specifications to determine inside diameter.
The Lock-n-Load 204 Half-Out Inserts are designed for slim carbon arrows with a .204″ID such as the Easton FMJ or the Black Eagle Rampage. The Lock-n-Load 204 features our four-flange style self-centering, gripping mechanism which produces a tight fit. Like the Lock-n-Load 165, the 204 grips the inside sidewall of the carbon arrow shaft, but with a shorter portion extending out of the shaft. The insert accepts standard 8-32 threaded broadhead or point.
Weight: 22 grains
Fit: Slim carbon shafts with a .204 ID (X series)
This list represents carbon arrow shafts with a .204 ID but may not be all inclusive. Consult your specific carbon shaft specifications to determine inside diameter.
Lock-n-Load 244 Inserts fits the standard “S” and “GT” and features our four-flange style self-centering, gripping mechanism, containing virtually the entire insert inside the carbon shaft. It grips the inside sidewall of the carbon arrow shaft – without glue. This insert is one of our lightest at just 17 grains, and like all Lock-n-Loads it accepts a standard 8-32 threaded broadhead. Easy set-up and installation. 5/64″ Allen wrench included.
Weight: 18 grains
Fit: Carbon shafts with a .244″-.246″ ID (S/GT)
This list represents carbon arrow shafts with a .244″ – .246″ ID but may not be all inclusive. Consult your specific carbon shaft specifications to determine correct ID.
92 Grain & 112 Grain
Lock-n-Load 300 Inserts are designed for standard crossbow carbon shafts with a .300 inside diameter. They features our four-flange style gripping mechanism with an aggressive knurling for an extremely tight, self-centering fit. The Lock-n-Load 300 is available in both 92 grain or 112 grain and both accept an 8-32 threaded broadhead.
Weight: 92 or 112 grains
Fit: Crossbow carbon bolts with .300” – 0.309” ID
Consult your specific carbon shaft manufacturer’s specifications to determine inside diameter.
Man, no gluing and you can index a broadhead to your fetching. My arrows fly like darts.
This makes the most sense of any insert I have ever used! No more cleaning and gluing in inserts and I can index them to my vanes. Excellent flight over all ranges. Well worth the price.
Fast and Solid
I ordered 4 packs of these to outfit 2 dozen black eagle deep impact arrows. Install was a breeze, no wait on glue to dry. The overall feel of the arrow was incredible with these hybrid outserts. I’m a big fan of kinetic energy and can’t wait to take this setup to the woods. I also outfitted the arrows with Nock Out lighted nocks, check them out, they are truly amazing! Arrow flight was great, and there is the ability to tune the outserts as needed. I haven’t put broadheads on them yet, so tuning may be needed. Overall I’m very thrilled with my purchase!
Possibly best insert ever!
Quick prompt delivery. Instructions were very easy to understand. Half outserts fit the arrows perfectly! This is by far the easiest way to index broadheads and makes changing broadhead styles so much quicker and easier. Will definitely be telling all my hunting buddies to try them out!!
Quick, easy and strong
I reordered the inserts #204, because my last hunting trip I shot a top 100 in the world buffalo. The ease of use contributed to this record. I adjusted my broadhead to match my odd vain and tightened the set screw and I had the confidence in knowing where my pin was that’s where the arrow was going. I made a 60 yd shot across a lake and I had my trophy. This product was along time coming and has value that can not be measured to an archer (1 and done shooter) like myself. I fully recommend this product for big and small game anywhere in the world!!!!!!!!!
Very Well Made!
I will first say that the lock-n-Load 204 inserts are very well made! The install was very easy, the fit was perfect! I bought these for ease of tuning my broadheads, and I must say it’s nice to finally be able to fine tune your broadheads to shoot like your field points. Best of all no more messy glue! I will be buying them for all my arrows. These are the Best!
Best combination on my Black Eagle Rampage arrows is the Lock-n-Load 204 and NOCK OUT Lighted Nocks!
No mess… no fuss!
I use the lock n loads on all of my arrows now and have not had one problem. They are fast and easy to use. One thing I like about them is that you can swap them out while in the field no glue necessary and no mess! No problem!
Love these inserts
Installed the Lock-n-Load on my new arrows in minutes! No waiting for glue to dry to shoot and can perfect my broadhead flight with experimenting by aligning or not aligning with the fletching. So much better than gluing!
Installing and setting up is a snap. Great design
Lock N Load 300 112 Grain
Best inserts I found period! Easy to index and install no gluing and are reusable! Only inserts I will buy from now on!
I Am Impressed!
I glued in six brass inserts and spin tested them; they were out by .006. Then I installed six Lock-n-Load inserts; the run out was .0007. I am impressed. Needless to say, I am done with glue-in inserts!!
Our Shop is currently closed for inventory purposes. Therefore, no purchases can be made at this time, but feel free to continue browsing for future purchases! Dismiss